Did you know that walls and ceilings are not the only space where mold can grow? Mold anywhere in your home can be harmful to your health. Taking action against mold when you notice signs or spot an affected area is essential. 

Mold can also develop on carpets, but you must be wondering: What causes mold to grow on carpet in the first place? Also, can carpet with mold be saved? Is it even possible? Let's explore all the ideas and begin with the causes. 

What Causes Mold to Grow on Carpet?

Mold usually develops underneath the carpet, and most people are unaware since there are no telltale signs in the beginning. This can be pretty dangerous since not only will it affect your health, but it will also stealthily spread across your home. 

While it is essential to know how to remove mold, you must also know what causes mold in carpets. 

Some reasons why mold might grow on the carpet are:

  1. Spills that aren't cleaned properly are a big reason for mold build-up. It is essential to clean up liquid and solid messes instantly. The bacteria and moisture can cause mold to grow easily. 

  2. Using too much water or liquid products to clean the product is another cause of mold growth on the carpet. Use less water and ensure that the affected area dries quickly.

  3. Moist, warm, and dark spaces with high humidity are conditions that help mold thrive. If the carpet has recently gotten wet, this makes the carpet an excellent ground for mold growth.

  4. If your carpet or its padding is low quality, it can be a big source of mold growth. Preventing mold in wet carpet is easier if there is a carpet pad underneath. However, it should be of high quality to fulfill its purpose. 

Is Carpet Padding Mold Resistant?

The carpet padding is layered at the bottom of the carpet and can act as a moisture barrier to prevent mold in carpet. An antimicrobial carpet pad can help prevent mold in the carpet. This is especially useful in areas that experience excessive moisture.   

Can Carpet with Mold Be Saved?

The answer is no. Porous material must be removed. Soft surfaces like carpets are porous, which means they contain spores and can be filled with fluid. Hence, carpets can get quite dirty, and the mold will spread and grow to other parts very quickly. 

Carpets provide the germs and pathogens an environment where they can thrive. So, instead of trying to save your moldy carpet, replace it or try better methods to prevent mold in carpet. 

How Long Before Carpet Gets Moldy?

If people realized how quickly mold builds up, they would clean up every drop of fluid without wasting any time. 

Mold can grow on the carpet within 24 to 48 hours of getting wet. However, if you have a mold-resistant pad underneath, you will have more time to prevent mold in carpet. A carpet with a high-quality mold-resistant pad takes up to 48 to 72 hours before mold growth is triggered.  

How to Prevent Mold in Carpet?

If you have pets or children in the house, you are bound to have multiple spills in your house. If your house is carpeted, this increases your chances of bold build-up. Mold growth on carpets is a health hazard. Hence, it is crucial to take the necessary steps and prevent mold in carpet through smart ways so you can avoid disastrous results of mold growth. 

Following are tips to prevent mold on carpet. 

  1. Dehumidifiers are excellent products that help control moisture in the air. This way, the thriving environment that carpets provide will be taken away.

  2. When installing a carpet, evaluate the area. If you think the area will have high moisture, for example, a bathroom, avoid carpeting it. 

  3. Invest in high-quality carpet padding. Trying to save money on the quality will only increase the likelihood of mold build-up. 

  4. Clean up and dry any spills. Standing water is a big reason for bold growth on the carpet. In case your carpet has suffered because of flooding or the carpet is soaked in water for a long time, it is best to replace it. Do not harbor a breeding ground for mold. 

  5. When cleaning, use enough water that is required. Do not soak the surface. Ensure the carpet has dried thoroughly and no amount of dampness is left. You can use a hair dryer to dry the wet area quickly.

Rather than wasting money and time on cleaning after the mold growth, adopt a cost-effective method and replace your carpeting. 

Preventing Mold in Wet Carpet

If you are wondering if there is a way to prevent mold on wet carpet, follow the tips below to ensure you prevent mold growth:

  • Step 1: Remove the excess carpet. Do it as quickly as possible. You can use a vacuum cleaner or a drier to fasten the process. 

  • Step 2: Turn on the fan. The flow of air will help dry the carpet naturally. If the spill is big, dry it with a vacuum cleaner and the fan on so it dries out quickly,

  • Step 3: Use a dehumidifier to reduce the moisture in the room. Once the moisture levels room goes down, so will the chances of mold building up. 

  • Step 4: It is also essential to check the furniture that is placed on the carpet. This will Water damage could be hidden under corners and furniture. Dry everything out and remove the furniture from the premises.  

Mold is a dangerous fungus, and you require immediate intervention to ensure the building is safe for living. You must also follow tips that will help prevent mold on carpet. If you do notice mold growth on your carpet, get in touch with professionals like AdvantaClean of Fort Lauderdale.

Get in touch with us and avail our services. Along with removing mold from your carpet, we can also provide an evaluation of the property to ensure there are no other spaces affected. Our team of experts ensures you get the proper treatment through experienced personnel at the best rates. Call us today!

Schedule an Appointment or Call (754) 218-8070

To request a service call, please fill out the form below and we will contact you via phone, email or text as soon as possible to confirm an appointment time. You will receive an email confirming your service request.
Phone to call (754) 218-8070