AdvantaClean of San Antonio NW Our Work
Case Studies
Location: San Antonio, TX 78218
Problem: A recent customer had a plumbing leak inside their bathroom walls.
Solution: We repaired the leak and dried up the area. Mold remediation was started to clean up three affected rooms and the air ducts were cleaned.
Location: San Antonio, TX 78130
Problem: Due to a previous contractor's work, A recent customers system wasn't sealed up as well as they left the handler inside the drain pan.
Solution: We cleaned all supply lines, raised the system up, and sealed off the plenum.
Location: San Antonio, TX 78254
Problem: An office suite had a plumbing leak for months that created mold in 3 different rooms.
Solution: We removed mold and treated the affected areas with an antimicrobial along with a fog. The property passed testing on first round of testing. No more mold!
Location: San Antonio, TX 78250
Problem: A recent customer had mold in air duct system/moisture issues in their home.
Solution: AdvantaClean cleaned the air ducts, air handler, and coils.
Location: San Antonio, TX 78250
Problem: We were called out by an investment realtor who found mold in one of the bathrooms while removing the tile around the tub.
Solution: The remaining tile was removed from around the tub. There was also mold growth on the ceiling of the bathroom. The damaged drywall was removed. The interior wall was cleaned and treated with an antimicrobial. The interior wall was treated with mold-resistant coating to prevent future mold growth inside the wall.
Location: San Antonio, TX 78250
Problem: We performed our annual dryer vent cleaning for Lifetime Fitness.
Solution: The dryer vents were inspected prior to cleaning. The technicians cleaned all of the dryer vents within the facility. It is important to keep dryer vents clean to prevent fires and mold growth.
Location: San Antonio, TX 78250
Problem: A customer had mold on the outside of air vents in two of their small bathrooms.
Solution: The customer was not sure if they had mold in their air ducts. We inspected the air ducts throughout the home. The air ducts were cleaned and treated for mold.
Location: San Antonio, TX 78250
Problem: The customer had a water leak in their laundry room. The customer found mold growing behind their hot water heater.
Solution: The damaged drywall was removed. The interior wall was treated with antimicrobial. The drywall was repaired by our general contractor. We were able to schedule the remediation process around the customer's busy schedule. The mold remediation and drywall repair happened in one day.The customer only had to be home for one day.
Location: San Antonio, TX 78250
Problem: The air condition leaked above the pantry which caused mold to grow in the pantry.
Solution: The damaged drywall was removed. The interior wall inside the pantry was clean and treated with antimicrobial. Next, we encapsulated the interior wall to prevent future mold growth. The pantry was rebuilt the next day by our general contractor.
Location: San Antonio, TX 78250
Problem: Mold was found in the air ducts throughout the home.
Solution: Every vent in the home was inspected and treated for mold. We perform a thorough air duct cleaning.
Location: San Antonio, TX 78253
Problem: We were called out to a customer’s home who had mold growing on their wall next to the refrigerator. The mold was initially found by pest control when they moved the refrigerator.
Solution: We quickly assessed the mold that was growing on the wall between a window that wasn't sealed and refrigerator. We quickly sealed the window and set up a containment in the kitchen. We then set up an air scrubber. Not only did we remediate the wall in question, but we also used mold spot treatment to clear up the spotted wall where the mold had been growing.
Location: San Antonio, TX 78130
Problem: We were contacted by a real estate agent who was in the process of showing a home when they discovered a leak under the bathroom sink. The leak started in the bathroom and spread throughout the first floor.
Solution: A containment was set up on the first floor. The room was placed under negative pressure. All contaminated material was removed. The structural components were clean and treated with anti-microbial. The HEPA vacuum was used on all contaminated structures. The room was kept under negative pressure for 48 hours.
Location: San Antonio, TX 78130
Problem: We received a call from an elderly lady who noticed that she had some mold growth in her bathroom under the sink. When we got to the home we inspected the master bathroom. We found mold growth throughout her cabinets.
Solution: The customer was scheduled for mold remediation the next day. A containment was set up in the master bedroom. The room was placed under negative pressure. All contaminated material was removed. The structural components were clean and treated with anti-microbial. The HEPA vacuum was used on all contaminated structures. The room was kept under negative pressure for 48 hours. We were able to work with our referral partners to remodel the customers bathroom.
Location: San Antonio, TX 78218
Problem: A young lady who had been suffering from migraines call us out to her home because she had mold growth in her closets. The mold growth was the result of a rook leak that was not properly corrected. The mold growth was next to the HVAC system in the home.
Solution: Mold remediation was started in the hall closets. After the remediation process was completed the customer had her air ducts cleans. The air ducts had not been cleaned in years. The technician removed years of dust and dirt build up. After the ducts were cleaned the technician applied an antimicrobial to the vents.
