Find Your AdvantaClean Location to Request an Appointment

What Gets Rid of Mold? Identify | Prevent | Remove

March 9, 2017 0 Comments
What gets rid of mold when it's in your home - doll victim

WHAT GETS RID OF MOLD?


If you’re reading a post about what gets rid of mold, chances are you’ve already found mold in your home. You’re interested in protecting your home’s structural integrity, and not to mention your health and the health of your loved ones. Before we delve into the topic of what gets rid of mold, it’s important to understand the dangers of mold, how it came to grow in your home, and how to prevent it from growing in the same place again or in a new place.

FREQUENTLY ASKED QUESTIONS

According to AdvantaClean mold specialists, mold needs three things to grow – a food source such as drywall, moisture, and optimum temperatures which fall anywhere between 32- and 120-degrees Fahrenheit. Some molds and mildews can be found feeding on the cellulose in the paper backing on your drywall, insulation, or wallpaper. Others have an appetite for the glues that are used to bond carpet to the backing. Left unchecked, mold eventually destroys the parts of the drywall, wallpaper, and carpet it comes in contact with.

But many molds just like to feast on everyday dust and dirt that gathers in the commonly moist areas of your home. Mold can dirty up your walls with white spider web like growths or clusters of small black specks, and creates the smell we often refer to as “musty.” It can be slippery and dangerous when it grows on damp basement stairs. Worst of all (when it comes to your home) is that mold can wreak plenty of havoc on your structural integrity via wood rot. We can’t overemphasize that mold needs moisture to get established, grow and reproduce. Mold problems and longstanding moisture or high humidity conditions go hand in hand. To conquer mold, you must also conquer moisture problems.

According to the Center for Disease Control and Prevention (CDC), for individuals susceptible to toxic mold, exposure has the potential to cause symptoms such as nasal stuffiness, eye irritation, wheezing, or skin irritation. Some people, such as those with serious allergies to toxic mold, may have more severe reactions. In particular, people with chronic lung illnesses, such as obstructive lung disease, run the risk of developing mold infections in their lungs.

What gets rid of mold in the simplest of terms is eliminating one of the three ingredients mold needs (food source, moisture, optimum temperature), you can prevent toxic mold growth in your home – this is why it’s so important to check for leaks and seepage, waterproof your basement or crawlspace, and call a professional water damage mitigation expert in the case of a home flood.

In addition to preventing mold growth, you should also know where to look for already-existing mold. The Federal Emergency Management Agency (FEMA) identifies the following as the most common potential mold-harboring appliances and structures in your home:
• Refrigerators
• Freezers
• Cooking stoves
• Dishwashers
• Hot water heaters
• Washing machines
• Dryers
• Drywall
• Subflooring
• Heating and air conditioning filters
HVAC ductwork

is mold affecting your health? how to get rid of mold e-book

YOU’VE FOUND MOLD, NOW WHAT GETS RID OF MOLD?

What gets rid of mold? Get the answers from AdvantaClean

The first step of what gets rid of mold is to fix the moisture problem your home has that’s setting the stage for its growth. You can scrub, dispose of, and replace moldy materials like rugs and carpet, but until you fix the problem, it will keep coming back. The fix can be as simple as sealing your leaky air conditioning system ducts, or as large as fixing a leaky roof. Sewer backups and floods are also ideal setups for mold and mildew growth.

Once you’ve fixed the moisture problem, discard of the moldy materials carefully. Improperly discarding moldy materials can stir up mold spores, spreading them even further around your house as you launch millions of spores into the air. Just one square foot of moldy drywall can contain more than 300 million mold spores; and even dormant spores inhabiting dried-out materials are irritating to inhale, and if they find moisture again, they spring back to life and establish new colonies.
If you find mold in your home, fix the water or humidity problem and call a mold remediation specialist immediately. Work with him or her to develop a mold remediation action plan. Working with your mold remediation professional, complete and carry out a repair plan, revising if more damage is discovered during remediation.

WHAT TO EXPECT

A repair plan will most likely involve closing off any ventilation grills with sheeting and duct tape and shutting down your furnace so that the blower doesn’t spread spores and dust throughout the home, as well as removing everything – furniture, pictures, lamps, etc. – from the affected room.

A most effective way to contain the affected area is to tape poly sheeting on all four edges of the door opening and having a slit cut up the middle from top to bottom.

If the moisture source is due to previous or recent water damage (such as a burst pipe or hurricane damage), contact a water damage mitigation expert.

is mold affecting your health? How to get rid of mold call to action

MORE INFO?

For more information on preventing mold growth, check out our post:

Stop Mold Growth Before it Starts, Tips to Prevent Mold Growth.

No comments for this post

Add a comment